Glass Railing made fully of stainless steel with 60x40 rectangular profiles. The used glass or glued laminated fixed with system fasteners ESKATT 50mm diameter twisted angle. Handrail support with regulated connector mounting to the wall. Stainless steel handrail 60x40. You can configure the railings with available profiles, eg .: 30x50; 40x40; 50x50; 80x40 etc. Fixing railings is possible directly to the floor or side of the stairs / landings with mounting flanges or rod with resin.
Stainless steel railing with safety glass, mounting rails straight to the base of the balcony or staircase, standard version: Baluster 60X40mm, 60X40mm handrail, profile lower and an upper C-section "C" seal of ribs depending on the thickness of the glass, laminated safety glass 4.4.2 . or 5.5.2 or 4.4.4.2. Linking side to the base of the balcony using flange directly to the side of the balcony (under warming). Flanges allow the free flow of arms to adjust the height and the distance from the ground railing posts. Makes assembly combined continuous weld in accordance with the standard.
The following table provides a list of basic profiles used in the balustrades along with corrector weights. Very important in selecting the appropriate profile conversion design are to be performed prior to the production of railings.
Railings ES-GLASS-PROFILE can be made from rectangular profiles according to the table below.
