ESKATT BALUSTRADES ES-GLASS-SUPPORTING-3000

The shape of the profiles tailored to each glass static

Static calculations thickness glass of 1,5kN to 3.5kN

Fitting the profile directly to the base or side

A wide range of adapters and accessories

ES-GLASS-PROFIL-3000-100 - mounting from the top

Profile for glass balustrade designed for glass: 6.6.4; 8.8.4; 10.10.4; 12.12.4. Profile for use indoor or outdoor. Versions: galvanized, painted standard silver-gray color. Profile transfers the load 1,5kN / m railing height 1100mm using glass 8.8.4. Editing profiles directly to the floor balcony or terrace screws with countersunk M12 spacing of 100mm, minimum length of the screws 120mm, recommended anchoring system-component resin or chemically bonded anchors of their respective strength parameters.

Complementary elements of the system ES-GLASS-PROFIL-3000-100

Technical installation project of fixing profile

Projects Downloads

Railing design AutoCAD DWG
Railing graphic design 1200x800

ES-GLASS-PROFIL-3000-200 - fixing to the side

Profile of engineering to the rail glass using glass: 6.6.4; 8.8.4; 10.10.4; 12.12.4. The profile can be used outside or inside the building. Possible execution: protected zinc coating, paint - standard silver-gray color. Profile of a self-supporting can carry loads of up to 1,5kN / m in a horizontal line at the overall height of 1100mm railings using safety glass / laminated 17.52mm thick (8.8.4). Profiles is mounted to the side of the stairs and terraces screws with countersunk M12 at 100mm, minimum length of the screws 120mm

Complementary elements of the system ES-GLASS-PROFIL-3000-200

Technical installation project of fixing profile

Projects Downloads

Railing design AutoCAD DWG
Railing graphic design 1200x800

ES-GLASS-PROFIL-3000-300 - mounting from the top and move the assembly line anchors

Profile balustrade railings intended to be self-supporting glass and move the anchor fixing lines. Through the use of offset mounting anchor line we have the opportunity of facing the outer edge of the profile of the face of the terrace, balcony floors, ie. Profile is designed to barriers to the use of glass: 6.6.4; 8.8.4; 10.10.4; 12.12.4. The profile can be used outside or inside. Versions profiles: zinc coating, painted RAL - standard: silver-gray. Profile construction designed for loads up to 1,5kN / m horizontally with glass (8.8.4). Profiles is mounted to the side of the stairs and terraces screws with countersunk M12 at 100mm, screw length. Min. 120mm. The standard we offset anchor line 85mm from the edge of the terrace. It is sufficient to offset the majority of applied projects balustrades. Alternate spacing increases the strength of fixing screws.

Technical installation project of fixing profile

Projects Downloads

Railing design AutoCAD DWG
Railing graphic design 1200x800

ES-GLASS-PROFIL-3000-400 - fixing to the side of the lowered anchoring line

Self-supporting structural profile rails intended for use in safety glass. Thanks to the offset fixing lines vertical profile, we can lower the anchor line profile to the concrete essential. Profile is also used to fasten the side a flight of stairs. Installation of anchors directly to her cheek stairs. The profile is based on individual parameters, ie. The angle of degrees, offset lines anchoring screws, glass thickness and dedicated static strength. In extreme conditions, it is possible to lower the anchor line of 1000mm below floor balcony, terrace or staircase. Profile to glass: 6.6.4; 8.8.4; 10.10.4; 12.12.4 or glass of any parameters. The profile can be equipped with additional wedges mounting gaskets or special for this purpose designed Sealant.

Technical installation project of fixing profile

Projects Downloads

Railing design AutoCAD DWG
Railing graphic design 1200x800

ES-GLASS-PROFIL-3000-500 - side profile adapted to the height of the floor

Profile structural glass railing with the use of safety glass, eg.: 8.8.4. Profile enables fine adjustment of the upper edge of the profile to the floor. A profile allows completely cover fasteners, no visible mounting holes which makes the profile of one of the visually aesthetic. The vertical mounting plate is arranged between the reinforced concrete example a layer concrete. For strength reasons, it is necessary to apply additional supports to a horizontal mounting plate. For this purpose, the profile can be freely configured and adapted to individual customer needs. Profile to glass: 6.6.4; 8.8.4; 10.10.4; 12.12.4 or glass of any parameters.