ESKATT BALUSTRADES ES-GLASS-SUPPORTING-2500

Jednoczęściowy profil balustrady wykonany z duraluminium

Mocowanie szkła klinami systemowymi wg grubości szkła

Mocowanie profilu proste do podłoża śrubami M10

Łatwy montaż nie wymagający stosowania otworów systemowych w szkle

Glass construction railings installed in the system profile ESKATT. Profile is applicable to balustrades mounted from the top to the floor or balconies. Using the mounting holes on the side of the profile can be used also in systems attached to the side. In this case, they will see the holes for the screws that mask the plugs ESKATT. Another solution is to use an adapter ES-GLASS-PROFILE-2500 adapter for side mounting without drilling additional holes. The surface profile is finished in The abrasive and does not require additional treatment.

Profile railings can be used in buildings where the required load railings in a horizontal line is to 1,5kN. Such objects are for instance. Offices, and the like. In this case, the thickness of the glass must be used 8.8.4. The surface profile does not require painting and occupancy plate. The amount of the wedges and spacers is adjusted according to the length of the glass used. Wedges parameters are selected individually to the thickness of the glass also their positioning. As a finishing touch from the top of the seal used to protect against dirt and water inflow. The system also has a profile end caps and corners.

Railing design AutoCAD DWG
Railing graphic design 1200x800

Folder glass railings ES-GLASS-PROFIL-2500

In order to stiffen the concentration railings and balustrades across the upper edge of the balustrade can be applied handrail elliptical, square, rectangular. Innovative solution is to use a bent channel bar with gasket system ESKATT. Below you will find a selection of accessories for railings self-supporting. The distance between the panes is selected individually from 3mm to 20mm. If the project requires application railings crevice should fill the gap between the panes of UV adhesive. When selecting the length of the glass panes must take into account all sorts of corners and caps.